Step 1: (Changing / Configuring Gateway IP in CUCM = 192.168.10.6)
OS Mode -> Settings -> IP -> Ethernet ->Default Gateway
Step 2: (Complete Routing)
GW1# router rip
GW1# network 1.0.0.0
GW1# network 192.168.10.0
GW2# router rip
GW1# network 1.0.0.0
GW1# network 192.168.100.0
Step 3: (Configure Codec)
- CUCM Admin Mode -> System -> Region -> Enter Name “HO- Region-Info”
- Add New -> Enter Name “BR-Region-Info”
- Go Inside “HO-Region-Info” and define codecs for WAN and LAN
For HO – HO
- Select Source = HO-Region-Info
- Select Destination = HO-Region-Info
- Select Audio Codec = G711
- Save
For HO – BR
- Select Source = HO-Region-Info
- Select Destination = BR-Region-Info
- Select Audio Codec = G729
- Save
Step 4: (Allocate Bandwidth)
- CUCM Admin Mode -> System -> Location -> Enter Name “HO-Location-Info”
- Select “unlimited” for Audio Calls
- Add New -> Enter Name “BR-Location-Info”
- Enter 26K for Audio Calls
Step 5: (Create Device Pool)
a. For HO
- Cisco Unified CM Administration -> System –> Device Pool -> Add New “HO-Device-Pool-Info”
- Select Region = HO-Region-Info
- Select Location = HO-Location-Info
- Save
b. For BR
- Cisco Unified CM Administration -> System –> Device Pool -> Add New “BR-Device-Pool-Info”
- Select Region = BR-Region-Info
- Select Location = BR-Location-Info
- Save
Step 6: (Call Device Pool on Phone)
- Cisco Unified CM Administration -> Device -> Select HO Phone -> Device Pool -> Select HO Device Pool “HO-Device-Pool-Info” -> Save -> Reset Phone
- Cisco Unified CM Administration -> Device -> Select BR Phone -> Device Pool -> Select BR Device Pool “BR-Device-Pool-Info” -> Save -> Reset Phone
No comments:
Post a Comment