Problem: Recently I installed Ubuntu 11.04 (wireless was working while installing) on my Dell Inspiron N4010 which uses Broadcom Wireless Adapter (How to know which network adapter you are using?). Wireless networks were even available when I fused it for the first time after installing. Then there were message from Ubuntu that restricted drivers are available for Broadcom STA (BCM4311) (why did it ask me to download the wireless drivers when wireless was working on the first hand..??). Any ways, I said, why not? I clicked on the activate button. It installed the driver and asked me to restart the computer. I restarted it and there you go. Wireless is on. But it detects no networks. I know there are wireless networks but Ubuntu is not detecting any wireless networks.
Reason: The reason what I think is some compatibility issues (its probably a bug in 11.04) with this version of Ubuntu and the restricted driver because same driver was working quite well in previous versions of Ubuntu.
Solution: Here is what you need to do. Use other Broadcom drivers. Download these drivers (from Windows or through wired network or a friend’s computer or from wherever you are reading this article 
).
).(Don’t know which Ubuntu you are using? Click here: Check you Ubuntu architecture)
Now remove the previous drivers in Ubuntu 11.04 by using: sudo apt-get remove bcmwl-kernel-source
Now install the appropriate driver (you have downloaded from the above links). Restart your computer. If restarting doesn’t work try shut down and then start it (strange…but works). Enjoy
Alternate Solution 1: If you could connect through a wired network, this solution might work for you. The problem is with STA drivers so better to deactivate/uninstall it.
§ Remove the STA driver from Additional Drivers
§ Open synaptic packet manager and install b43-fwcutter then firmware-b43-installer
§ Restart
Alternate Solution 2: People who cannot solve the problem with the above specified method may want to try this one. Here you go:
§ open the ‘Synaptic Package Manager‘ and search for ‘bcm’
§ uninstall the ‘bcm-kernel-source‘ package
§ make sure that the ‘firmware-b43-installer‘ and the ‘b43-fwcutter‘ packages are installed
§ type into terminal:
§ cat /etc/modprobe.d/* | egrep '8180|acx|at76|ath|b43|bcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|witch|wl'
- (you may want to copy this) and see if the term ‘blacklist bcm43xx‘ is there
- if it is, then type cd /etc/modprobe.d/ and then sudo gedit blacklist.conf put a # in front of the line: blacklist bcm43xx then save the file (I was getting error messages in the terminal about not being able to save, but it actually did save properly).
- reboot
Hopefully this works for you all!
Questions, suggestions and feedbacks are welcomed.
No comments:
Post a Comment